How To Install the CAPT software on LBP
When installing the printer driver, the printer is not recognized automatically even after the USB cable is connected.

Cause 1:
The USB cable has already been connected and the printer is ON before installing the printer driver.
Remedy:
Turn the printer OFF and disconnect the USB cable. Then, connect the USB cable again and turn the printer ON.

Cause 2:
There is a possibility that the printer is turned OFF.
Remedy:
Turn the printer ON.

Cause 3:
There is a possibility that the USB cable is not connected properly.
Remedy:
Make sure that the printer and computer are connected with the USB cable properly.

Cause 4:
There is a possibility that an inappropriate USB cable is being used.
Remedy:
Make sure that a USB cable appropriate for this printeris being used. The USB interface on this printer is USB 2.0 Hi-Speed(Windows 2000/XP/Server 2003 only) or USB Full-Speed (USB 1.1equivalent).

Cause 5:
There is a possibility that the printer driver cannot be installed from CD-ROM Setup.
Remedy:
Install the printer driver with Plug and Play. Fordetails on installing the printer driver with Plug and Play, see"Chapter 3 Setting Up the Printing Environment" in User's Guide (PDFmanual) in the CD-ROM supplied with the printer.


More FAQs
Special offer
New Arrivals